Schmidt ｜Snowplow｜Tarron HP-2W
Plough blade
The six plough blade segments, including outer wings both right and left, adapt perfectly to the contours of the road thanks to their individual suspension which, even at high speeds, leads to very clean snow clearance. The two outer wings can be adjusted so that different clearing widths can be set.
When fully unfolded, the snow plough has an outstanding working width of 6.2 m. When the left wing is folded in, the working width reduces to 5.1 m, and when the right wing is folded in, it reduces to 4.5 m. When both wings are fully folded, the clearing width is 3.4 m, while the wings can folded hydraulically in both transport and clearing positions, minimising the transport width. They are automatically raised during the clearing operation.
Override security system
The six segments of the plough adapt perfectly to the contours of the road, allowing it to automatically pass over small obstacles. Even if the plough hits an obstacle, only the one ploughshare that has direct contact with it will rise, the rest of them will stay continue snow clearing.
Individual suspension on four arms ensures that the share can spring back and prevent damage to the plough, while hydraulic valves open automatically in the event of a collision, allowing the wings to fold in easily.
Cutting edges
Steel cutting edge (S)
A multi-purpose, cost optimised solution for aggressive clearing of hard and/or compact snow. Steel cutting edges are resistant to bending and twisting, giving a clean result.
Combi cutting edge (size 36 and 50) (C36 / C50)
A more durable cutting edge made of steel, rubber and ceramic. This cutting edge is meant for aggressive snow clearing and can be a good alternative if the steel cutting edge is wearing out too fast. The combination of materials ensures noise and vibration reduction.
TUCA SX cutting edge
A state-of-the-art, high performance cutting edge designed for long- term use. The patented Küper Wave Technology uses a curved profile to remove snow without resistance. Separate tungsten holders embedded in rubber and vulcanized between front and rear Hardox 400 steel plate make the TUCA SX incredibly durable.
GK 5 cutting edge
A GK cutting edge allows for more efficient snow slush clearing with longer service life and less friction. This cutting edge is made of steel, rubber and corundum and is therefore more aggressive than a rubber cutting edge.
Lifting device
A three-link lifting device ensures optimum power transmission to the carrier vehicle and tension-free lifting and lowering of the snow plough. Enables to gain big lifting height and it is easy to operate.
Angling system
Two swivel cylinders are used for making lateral adjustments, which place the plough in the desired clearing position. Adaptation system of the turning angle prevents the plough from being angled to the left side when there is a risk of the collision with the vehicle. Easier maintenance of the plough thanks to providing the same hydraulic cylinders for the lifting and angling device as well as for the operating the wings.
Collision protection
The wings fold in and out hydraulically, while three sensors ensure they do not damage the vehicle when folding in. The current working width is always marked by LED position lights.
Working support devices
Castor wheels
The infinitely height-adjustable castor wheels with optional splash guards ensure precise adjustment of the snow plough and provide appropriate aggressiveness during snow clearing. They support the frame when driving over obstacles and extend the service life of the cutting edge.
Sliding shoes
Alternatively, maintenance-free height-adjustable sliding shoes can be fitted. They are made of highly wear-resistant steel or combi.
Kerb deflectors
The plough wings are each fitted with a kerb deflector, which prevents the plough body from scraping against kerbs and edges.
Snow deflector
The Tarron HP-2W is equipped with a polyurethane snow deflector, which can be optionally raised to reduce the clearance width.
Mounting
The centre of gravity of the Tarron HP-2W is only 40cm in front of the vehicle's mounting plate, so that it can be mounted on both three- and four-axle vehicles, providing the vehicle has a front axle of at least nine tonnes.
Options
- Warning marks, warning flags or LumiFog
- Side lamps LED / Additional work light on the left or right side
- LED flashing lights (orange)
